Swiss Basic Set
JUICE BOOSTER 2
- Extremely sturdy design: all components are waterproof, temperature resistant and safe to be driven over
- Integrated residual current device for protection against DC and AC fault currents, detailed fault detection
- Total length: 5 m plus adapter length of approx. 40 to 50 cm (can be extended up to 25 m with 5 m and 10 m extension cables)
- Set includes 2 adapters: CEE32 400 V, T13 230 V
- Over 30 adapters available in total, for charging vehicles at most sockets worldwide
The JUICE BOOSTER 2 is an extremely versatile charging solution for electric vehicles with a Type 2 vehicle inlet. It can be used as a wall box, as a mobile charging station or as a Type 2 cable for public charging stations (3-in-1). With an output power of up to 22 kW, the device can charge e-vehicles from virtually any conventional household or industrial socket worldwide – and always with maximum speed, safety and convenience. Thanks to the specially developed inlet adapters and the extensive range of safety devices, it is impossible to operate the device incorrectly. The charging station is lightweight and compact but also extremely sturdy.
The JUICE BOOSTER 2 makes charging a vehicle as easy as charging a smartphone. Just connect the JUICE BOOSTER 2 to a mains socket using the appropriate safety adapter cable. Then plug the Type 2 connector into the vehicle inlet. Thanks to special pin coding in the safety adapter, the JUICE BOOSTER 2 automatically recognises the available amperage and voltage. The JUICE BOOSTER 2 is fully compliant with all applicable standards and meets the highest safety requirements (IP67 and IK10). The charging station also offers RCD protection against DC and AC fault currents, which eliminates the need for expensive building installations. This feature also protects other devices in the circuit.
| Dimensions | Diameter: 70 mm, Length: 225 mm |
| Weight | 1 kg excluding cable; 3.2 kg with cable and connector |
| Input current | 230 V, 6–32 A (single phase) or 400 V 6–32 A (3-phase) AC |
| Power output | Depends on input current: 1.4 – 22 kW AC |
| Colour | Metallic anthracite Cable: black |
| Operating temperature | -25°C to +45°C |
| CE conformity | IEC 62752, 62196, 61851, Mode 2/3, EMC, RoHS |
| Protection rating – FI – safety | IP67 - RCD DC 6 mA, AC/DC 30 mA |
| Mains-end plug | via 25 self-detecting adapters available for household, industrial and EV sockets, cable 1.4 m + adapter approx. 30 cm |
| Vehicle-end connector | Type 2/Type 1 (IEC 62196), Cable length: 3.1 m |
Wir bieten Ihnen auf dieses Produkt 2 Jahre Gewährleistung und 24 Monate Garantie gemäss unseren AGB.
The JUICE BOOSTER 2 is an extremely versatile charging solution for electric vehicles with a Type 2 vehicle inlet. It can be used as a wall box, as a mobile charging station or as a Type 2 cable for public charging stations (3-in-1). With an output power of up to 22 kW, the device can charge e-vehicles from virtually any conventional household or industrial socket worldwide – and always with maximum speed, safety and convenience. Thanks to the specially developed inlet adapters and the extensive range of safety devices, it is impossible to operate the device incorrectly. The charging station is lightweight and compact but also extremely sturdy.
The JUICE BOOSTER 2 makes charging a vehicle as easy as charging a smartphone. Just connect the JUICE BOOSTER 2 to a mains socket using the appropriate safety adapter cable. Then plug the Type 2 connector into the vehicle inlet. Thanks to special pin coding in the safety adapter, the JUICE BOOSTER 2 automatically recognises the available amperage and voltage. The JUICE BOOSTER 2 is fully compliant with all applicable standards and meets the highest safety requirements (IP67 and IK10). The charging station also offers RCD protection against DC and AC fault currents, which eliminates the need for expensive building installations. This feature also protects other devices in the circuit.
| Dimensions | Diameter: 70 mm, Length: 225 mm |
| Weight | 1 kg excluding cable; 3.2 kg with cable and connector |
| Input current | 230 V, 6–32 A (single phase) or 400 V 6–32 A (3-phase) AC |
| Power output | Depends on input current: 1.4 – 22 kW AC |
| Colour | Metallic anthracite Cable: black |
| Operating temperature | -25°C to +45°C |
| CE conformity | IEC 62752, 62196, 61851, Mode 2/3, EMC, RoHS |
| Protection rating – FI – safety | IP67 - RCD DC 6 mA, AC/DC 30 mA |
| Mains-end plug | via 25 self-detecting adapters available for household, industrial and EV sockets, cable 1.4 m + adapter approx. 30 cm |
| Vehicle-end connector | Type 2/Type 1 (IEC 62196), Cable length: 3.1 m |
Charging accelerator incl. wall mount
