RCD (FI) A-EV Residual Current Device
Residual Current Device
- Residual current device especially for electro-mobility
- The residual-current device (RCD) is installed in the charging point supply line as a DIN rail.
- Specially developed to meet the needs of e-mobility
- Ensures that any upstream Type-A RCD are not blinded
- Suitable for charging cables with 400V (three-phase), up to 32A
RCD A-EV
Residual current device especially for electro-mobility
DOEPKE DFS 4
This RCD is installed in the charging point supply line as a DIN rail. It has been specially designed for the needs of e-mobility and ensures that any upstream A RCDs are not blinded.
Suitable for charging cables with 400V (three-phase), up to 32A.
Also triggered by AC residual currents of > 30mA and DC residual currents of > 6mA in accordance with the relevant standards.
Important: Be sure to choose this RCD and not a conventional RCD solution, a (more expensive than this) RCD B.This would not be triggered until high residual currents occur, and is therefore unusable for e-mobility purposes.
Installation instructions
Electricians can request installation instructions by email.
Wir bieten Ihnen auf dieses Produkt 2 Jahre Gewährleistung und 24 Monate Garantie gemäss unseren AGB.
RCD A-EV
Residual current device especially for electro-mobility
DOEPKE DFS 4
This RCD is installed in the charging point supply line as a DIN rail. It has been specially designed for the needs of e-mobility and ensures that any upstream A RCDs are not blinded.
Suitable for charging cables with 400V (three-phase), up to 32A.
Also triggered by AC residual currents of > 30mA and DC residual currents of > 6mA in accordance with the relevant standards.
Important: Be sure to choose this RCD and not a conventional RCD solution, a (more expensive than this) RCD B.This would not be triggered until high residual currents occur, and is therefore unusable for e-mobility purposes.
Installation instructions
Electricians can request installation instructions by email.
