Wall mount with U-bracket and safety lock | for JUICE BOOSTER 2
- Upgrade für JUICE BOOSTER 2 zur vollwertigen Wandladestation
- Zwei Ausführungen erhältlich: mit oder ohne verschliessbarem Bügel
- Mit einem Handgriff einhängen und für Reisen einfach entfernbar
- Einfachste Montage mit nur zwei Schrauben (in Lieferumfang enthalten)
- Dank integriertem Wechsel- und Gleichstrom-FI-Schutz im JUICE BOOSTER 2 wird kein separater FI in der Zuleitung mehr benötigt
Wall mount for JUICE BOOSTER 2
This makes your mobile charging station JUICE BOOSTER 2 a fully-fledged, safe and a very low-cost charging station.
Choose between two versions, with and without the lockable bracket.
Flexible:
With only one hand, you can mount your JUICE BOOSTER 2 into the bracket and remove it just as easily for travel.
Secure:
While in private garages the option without locking bars is sufficient, EV-drivers using public parking garages rather choose the variant with bracket and key lock. This ensures your device is effectively protected against unauthorized use.
Easy to assemble:
Two holes need to be drilled using the bracket directly as a template. Rawlplugs and screws are included. Done.
Cost-saving:
Thanks to the built-in AC and DC FI protection in the , you do not need separate FI protectors in the supply line. This allows you to save about 300 to 600 euros compared to a typical wall charging station.
Durable:
Made of 5 mm thick aluminium and powdercoated. Hinge rivet made from stainless steel for the security-bracket.
Wir bieten Ihnen auf dieses Produkt 2 Jahre Gewährleistung und 24 Monate Garantie gemäss unseren AGB.
Wall mount for JUICE BOOSTER 2
This makes your mobile charging station JUICE BOOSTER 2 a fully-fledged, safe and a very low-cost charging station.
Choose between two versions, with and without the lockable bracket.
Flexible:
With only one hand, you can mount your JUICE BOOSTER 2 into the bracket and remove it just as easily for travel.
Secure:
While in private garages the option without locking bars is sufficient, EV-drivers using public parking garages rather choose the variant with bracket and key lock. This ensures your device is effectively protected against unauthorized use.
Easy to assemble:
Two holes need to be drilled using the bracket directly as a template. Rawlplugs and screws are included. Done.
Cost-saving:
Thanks to the built-in AC and DC FI protection in the , you do not need separate FI protectors in the supply line. This allows you to save about 300 to 600 euros compared to a typical wall charging station.
Durable:
Made of 5 mm thick aluminium and powdercoated. Hinge rivet made from stainless steel for the security-bracket.
